Learn How To Install Armstrong Vinyl Tiles Now!

Installing Armstrong vinyl tiles is a great way to update the look of your home. Whether you’re laying them in a kitchen, bathroom, or any other room in your house, they’re a great way to bring style and charm to any space. The process of installing vinyl tiles is relatively simple, though the exact steps will vary depending on the type of tile you’re installing. This guide will walk you through the basics of installing Armstrong vinyl tiles and provide tips for achieving a professional-looking result.

How To Install Armstrong Vinyl Tiles

Installing Armstrong vinyl tiles is a relatively easy DIY project that can be completed in a day or two. First, prepare the surface by cleaning and sanding the area. Next, apply a thin layer of an adhesive to the back of each tile and then place it on the surface. Make sure to use a tapping block to make sure the tiles are secured. Continue this process until the entire surface is covered in vinyl tiles. Once you finish laying down the tiles, use a roller to ensure the tiles are properly adhered to the surface. Finally, let the adhesive dry and enjoy your newly installed Armstrong vinyl tiles!

Prepare the floor surface

Preparing the floor surface is an integral part of any vinyl tile installation. Armstrong vinyl tiles are a resilient flooring option that are easy to install and can last for years if properly installed. To ensure proper installation, you must prepare the floor surface prior to laying the tiles.

The first step in preparing the floor surface is to make sure it is flat and level. Any bumps or dips in the flooring should be corrected before beginning. You can use a leveling compound to fill in any depressions or use a belt sander for larger irregularities. Once the floor is level, it should be swept and vacuumed to remove any debris.

Next, you should use a primer to seal any porous surfaces. This will ensure that the adhesive will bond properly with the flooring. Once the primer is dry, you must apply a thin layer of adhesive to the entire floor surface. This will help ensure that the vinyl tiles stay in place and don’t shift over time.

Finally, you should install a vapor barrier over the entire floor. This will protect the flooring from moisture and also help to reduce sound transmission. The vapor barrier should be applied in two layers, overlapping each layer by at least six inches. Once the vapor barrier is in place, you can begin to install the Armstrong vinyl tiles.

Preparing the floor surface is an important step in any vinyl tile installation. It helps ensure that the tiles remain in place and that the adhesive bonds properly to the flooring. By taking the time to properly prepare the floor surface, you can enjoy your Armstrong vinyl tiles for years to come.

Lay the tiles

Installing Armstrong vinyl tiles is an easy DIY project that will spruce up any room in your home. The key to success is in the preparation, so it’s important to take the time to do it properly. Here’s what you need to know to lay the tiles and create a professional-looking finish.

First, you’ll need to prepare the floor. Clean it thoroughly, and make sure to remove any debris that has accumulated over the years. Any bumps or indentations should be filled in with a suitable floor-leveling compound. Once the floor is smooth, it’s time to lay the Armstrong vinyl tiles.

Start in one corner of the room, and lay the tiles in a continuous line along the wall. It’s important to leave a small gap between the tiles and the wall, which will be filled with grout later. As you lay the tiles, make sure to keep them even and level. It’s a good idea to use a spirit level or straight edge to check the surface as you go.

Learn How To Install Armstrong Vinyl Tiles Now!

Once the tiles are laid, you’ll need to trim them to fit around obstacles like doorways and cupboards. Use a sharp knife to trim them to size, and make sure to leave the necessary gaps.

When the tiles are in place, it’s time to grout. Mix up the grout according to the manufacturer’s instructions, and use a rubber float to fill in the gaps between the tiles. Make sure to remove any excess grout with a damp sponge.

Finally, you can seal the tiles with a suitable sealant. This will help protect the tiles and make them easier to clean.

With these simple steps, you’ll be able to lay Armstrong vinyl tiles and create a beautiful, long-lasting finish. Just remember to take your time and do the job properly – the results will be worth it!

Cut the tiles

When it comes to flooring, Armstrong vinyl tiles are a popular choice for many homeowners. Not only are these tiles easy to install, but they also come in a wide variety of colors and styles, making them perfect for any space. If you’ve been looking to install Armstrong vinyl tiles in your home, look no further! Here’s a complete guide on how to do it.

Before you start, make sure you have the right tools and materials. You’ll need a measuring tape, a utility knife, a straightedge, and a damp cloth. Additionally, you’ll also need adhesive remover, adhesive, and a trowel.

First, measure the area you’re going to be working in. This will help you determine the number of tiles you’ll need for the job. Then, use the utility knife to cut the tiles to fit the space. Make sure to use a straightedge to ensure you’re cutting them straight.

Once you’ve cut the tiles to the right size, you’ll need to remove any existing adhesive. To do this, use an adhesive remover and a damp cloth. Once the adhesive is gone, use the trowel to spread the new adhesive in an even layer over the area you’ll be installing the tiles.

Next, you’ll need to lay the tiles down. Make sure each tile is flush with the next one so that there are no gaps or uneven spaces between them. Use a damp cloth to wipe away any excess adhesive.

Finally, you’ll need to grout the tiles. To do this, mix the grout according to the instructions on the package and spread it over the tiles. Use a damp cloth to wipe away any excess grout.

And that’s it! Installing Armstrong vinyl tiles is an easy project that will add a lot of character to your home. Now that you know how to do it, you can start planning your next flooring project!



Installing Armstrong Vinyl Tiles is a relatively simple and straightforward process. With the right tools and materials, as well as a bit of preparation and careful attention to detail, you can complete the job quickly and without too much effort. By following the steps outlined in this article, you should have no trouble at all getting your new Armstrong Vinyl Tiles installed and looking great. Good luck!